| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Max Head m | 21.5 | Turbine Model | ZDJP502-LH-95 |
| Design Head m | 19.8 | Generator Model | SF1100-10/1730 |
| Design Flow m3/s | 6.79147 | Generator Standard Pole Number | 10 |
| Elevation m | 800 | Axial Water Thrust Coefficient | 0.85 |
| Runner Model | ZDJP502 | Axial Water Thrust 10kN | 11.92949951 |
| Designed Unit Speed r/min | 128 | Cavitation Erosion | 0.5 |
| Design unit Flow [m3/s] | 1.7 | Allowed Suction Height M | -1.788888889 |
| Model Efficiency | 0.927 | Calculated Governor Power 10KN | 1325.472428 |
| Efficiency Revision | -0.017 | Round up Governor Power 10KN | 1000 |
| Actual Turbine Efficiency | 0.91 | Calculated Valve Diameter M | 1.799677692 |
| Generator Efficiency | 0.94 | Round Up Valve Diameter M | 1.8 |
| Plant Output KW | 1128.41079 | Frequency Hz | 50 |
| Runner Diameter Calculation M | 0.947525998 | Max. Speed Rise | 60 |
| Round Up Runner Diameter M | 0.95 | Max. Pressure Rise % | 50 |
| Operation unit Flow [m3/s] | 1.691157208 | Specific speed mkw | 402.1872037 |
| Operation Unit Speed RPM | 128.0979739 | Unit runaway speed rpm | 120 |
| Turbine Discharge m3/s | 6.79147 | Turbine Runaway Speed rpm | 562.0697801 |
| Turbine Output Kw | 1200.43701 | First critical speed rpm | 730.6907141 |
| Generator Output Kw | 1128.41079 | Generator Runaway speed rpm | 1000 |
| Turbine Calculation Speed r/min | 599.5410987 | Generator output Kw | 1100 |
| Turbine Standard Speed r/min | 600 | Generator Voltage V | 6300 |
| Generator Standard Speed r/min | 600 | Power factor | 0.8 |
| Generator Calculation Pole Number | 10.00765421 | Generator Current A | 126.0126837 |
| No. | Appell. | Unit | Quant. |
| 1 | Guide Vane Upper, Middle, Lower Bushing | Set | 1/2 |
| 2 | Guide vane seal ring | No/Set | 1 |
| 3 | Shear pin of guide vane | Set. | 1 |
| 4 | Seal rings | Set | 2 |
| 5 | Springs of all types | Set. | 2 |
| No. | Appell. | Unit | Quant. |
| 1 | Radial Bearing Shell | set/unit | 1 |
| 2 | Thrust pad | set/unit | 1 |
| 3 | Brake block, seal ring, spring | Sets. | 1 |
| 4 | magnet pole key | set | 1/8 |
| 5 | Insulation board, insulation sleeve, etc for bearing | pcs | 1 |
| 6 | stator dove-end wedge | set | 1/3 of spare wire |
| No. | Appell | Unit | Quant. |
| 1 | Runner dismantle tool | Set | 1 |
| 2 | Special Wrenches and Lift eyebolt | Set | 1 |
| No. | Appell. | Unit | Quant. |
| 1 | Runner, dismantle tool | Set | 1 |
| 2 | Wrenches of all kinds | 1 set | |
| 3 | Turning tool | 1 set |
| No. | Appell. | Model | Quant. | Note |
| 1 | Shear pin transducer | CJX-9 | 16 | Water distributor protection |
| 2 | Pressure transmitter | ZYB | 1 | Pressure at spiral case inlet |
| 3 | Pressure transmitter controller |
ZYB | 1 | Vacuum pressure at draft tube inlet |
| 4 | Stroke switch | HL | 2 | (wicket gate servomotor position) |
| 5 | Vacuum gauge | 1 | Draft tube vacuum | |
| 6 | Air admission valve | 1 | Vacuum destroy, automatic | |
| 7 | Water lever sensor | 1 | Pressure type | |
| 8 | Fore bay monitor system | 1 | CCTV system |
| No. | Appell. | Model | Quant. | Note |
| 1 | Resistance thermometer Pt100 | WZPD-Pt100 | 6 pieces | Measure Stator temperature |
| 2 | Resistance thermometer Pt100 | WZP | 4 pieces | Bearing Oil temperature measure |
| 3 | Flow indication signaler | SLX | 2 pieces | Bearing Cooling water outlet pipeline |
| 4 | Pressure Gauge | Y-100 | 2 pieces | Bearing Cooling water inlet pipeline |
| 5 | Pressure Gauge | Y-100 | 2 pieces | main Cooling water inlet pipeline |
| 6 | Transistor plunger pump | QB36-A | 2 pieces | Motored oil pump |
| 7 | Stroke Switch | LXW | 2 pieces | brake |
| 8 | Gear speed detector | 1 piece | Shaft rotation speed | |
| 9 | Gear speed transducer | 1 piece | Shaft rotation speed |
){kind=link}